Description

Some of our LED lighting products support brake and turn signal function mimicking.  Cool features, but to make them work, you have to tie into the respective lights engaged power signal.  This triggers when the LEDs should switch to those behaviors and when back to normal function when the braking or signaling is discontinued.  Sometimes the power to these lights is already running at 12v, but sometimes not.  If not, you will need to convert it first.  Otherwise you can destroy the LED product by connecting it to a feed with too much power.

When that is the case, these are relatively inexpensive, easy to wire, small to conceal, waterproof and get the job done.  They convert any single feed of 36v or 48v to usable output voltage of 12v DC, output current 5a, output power 60w.

Anti dust, anti-shock construction.  IP67 water-proof.

While easy to wire, reverse wiring them is not supported.  Connecting both the + and – inputs and outputs correctly is imperative.  If uncertain, utilize a certified installer.